Hello everyone, I am the principal engineer of Nuvoton Technology, Morgan. Today, I will show you how to use Mbed OS on the NuMaker-IoT-M487 development board to control LED and buttons. First, open Chrome browser, enter the URL https://ide.mbed.com. Please make sure that NuMaker-IoT-M487 board already selected in the upper right corner after you log in. If not, please refer Nuvoton IoT Tutorial series “Get Started with Mbed OS” which has a detailed description of how to add a board. Then click the “New” on the upper left, a “Create new program” window will be displayed. You can see that the Platform has been set to NuMaker-IoT-M487. In the Template field, select the "NuMaker GPIO Interrupt with Debounce Setting" for this tutorial. Then click OK. Now you can see that the sample code has loaded on the page. Click on “main.cpp”, this sample code uses SW2 button for demonstration. Click on “Compile” to build it. It is in compiling, please wait a moment. Then you can see a lot of messages at the bottom of the page. The last message is “Success!” The browser will download the binary firmware file directly after a successful compiling. It will be saved in a default download folder or the folder based on your browser setting. In Chrome, you can click download file and select “Show in folder”. Then we have to connect the NuMaker-IoT-M487 USB port to your computer and make sure the onboard LED lights up. Let’s head back to the download folder where you can see the binary firmware file (NuMaker-mbed-GPIO-Interrupt.NUMAKER_IOT_M487.bin). Drag and drop the file to NuMicro MCU drive. You will see the copying progress dialog box. Next step is to press the SW2 button on the board to toggle LED. You can see the reaction of each press. That’s all for this tutorial. Thank you for watching. Welcome to subscribe to our channel. If you want to know more information, please contact us at SalesSupport@nuvoton.com - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/en/numaker-iot-m487 Contact us: SalesSupport@nuvoton.com #Tool #Training #Learning #Intermediate #en

Hello everyone, I am the principal engineer of Nuvoton Technology, Morgan. The development board we are using today is Nuvoton’s NuMaker-IoT-M487. It is powered by the NuMicro M487 microcontroller with Arm Cortex-M4 core, built-in RJ45 Ethernet, and Wi-Fi module allowing users to connect to clouds by wire or wirelessly. It supports several RTOS including Arm Mbed OS, Amazon FreeRTOS, and AliOS Things. Today, I will show you how to use Mbed OS on the NuMaker-IoT-M487 development board. First, open Chrome browser, enter the URL https://os.mbed.com to register an account if you don’t have one. Move the mouse cursor to the human icon in the upper right corner then click “Log in or Sign up” or click “Sign up for free” directly. Then click “Sign up” Fill in your e-mail address and relevant information, and finally click Sign up. Check your mailbox to receive the certification letter and authorize it. Then let’s log in to use the online compiler environment. Move to the human icon in the upper right corner, and then click “Log in or Sign up”. And enter your account and password. After a successful login, it will return to the first page and then click “Compiler” on the left side of the human icon. It will lead us to the online compiler web page. The following demonstration is all operated on this page Click “No device selected” in the upper right corner to add and select Nuvoton’s NuMaker-IoT-M487 development board. It opens the “Select a Platform” page. We click the button, show “Add Board” with green “+”, in the lower-left corner. Next, it shows the page, let us choose a board. Scroll down to find NuMaker-IoT-M487, and click it. It opens the NuMaker-IoT-M487 board page (https://os.mbed.com/platforms/NUMAKER-IOT-M487/). Scroll down the page to find the button “+Add to your Mbed Compiler”, and click it. Click “Compiler” on top of the page to return to the online compiler environment. If the “NuMaker-IoT-M487” small icon appears in the upper right corner, you can start to import a sample code. Otherwise, click “No device selected” again. At this time, you can see the NuMaker-IoT-M487 icon already in the “Select a Platform” dialog box, click the icon to select it and then click “Select Platform” in the upper right corner. It returns to the online compiler page, and the “NuMaker-IoT-M487” icon shows in the top right corner. You can now start to import a sample code. First, click “New” on the top left side, a small “Create new program” dialog box appears. The “Platform” selects “NuMaker-IoT-M487” automatically. In the “Template” field, please select “mbed OS Blinky HelloWorld” example code, click OK. You can see the sample project has been loaded on the page, click “main.cpp” to show the source code. Let’s add a printf() function to print out a string in the main program. Check if statements are correct, save it, and click “Compile” to build code. Now it’s compiling, let’s wait for a moment. And you can see a lot of messages at the bottom of the page. The last message is “Success!” The browser will download the binary firmware file directly after a successful compiling. It will be saved in a default download folder or any folder based on your browser setting. In Chrome, you can click download file and select “Show in folder”. Then we need to connect the NuMaker-IoT-M487 USB port to your computer and make sure the onboard LED lights up. Let’s head back to the download folder where you can see the binary firmware file (mbed-os-example-blinky.NUMAKER_IOT_M487.bin). Drag and drop the file to NuMicro MCU drive. You will see the copying progress dialog box. After the copy is completed, the firmware starts to execute. One LED on board starts blinking. To see the printout message, go on the following steps. Please find the virtual COM port assigned for NuMaker-IoT-M487 in Device Manager. In the demonstration, the “Nu-Link Virtual Com Port” is COMx. Then use your terminal tool of choice. Here we use Putty. Open the COMx port with 9600 baud rate, 8 bits, 1 stop bit, none parity, and no flow control settings. You can see “Hello World!” printed in the terminal. That’s all for this tutorial. Thank you for watching. If you want to know more information, please contact us at SalesSupport@nuvoton.com - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/en/numaker-iot-m487 Contact us: SalesSupport@nuvoton.com #Tool #Training #Learning #Intermediate #en

經由ADC量測Bandgap電壓，能夠反推電池的電壓，再搭配電池的規格文件，可得知產品目前所剩電量。另外，結合新唐晶片內部紀錄bandgap電壓的機制，可以消除不同晶片間的製程誤差，以得到更精準的電池電壓量測結果。 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/ 聯絡我們： SalesSupport@nuvoton.com

以新唐 NuMaker-IoT-M487 為平台，使用 Mbed OS進行開發，學習各種功能。觀看本片，您將學會使用NuMaker-IoT-M487開發板配合Mbed OS 範例程式控制 Thermo 6 Click溫度感測器以讀取數據。 哈囉大家好，我是新唐工程師Miya，今天為大家介紹如何使用新唐NuMaker IoT-M487在MbedOS使用溫溼度感測器，它是參考 Mbed 社群提供的溫度感測器的控制範例，很快速就能整合完成實際應用。 首先打開Chrome瀏覽器，輸入網址"https://ide.mbed.com/"，登入後先確認右上方板子已經有帶出”NuMaker-IoT-M487及板子小圖示”了，如果沒有可參考教學影片”step by step讓你了解如何運行Mbed OS”，裡面有詳細的示範怎麼新增板子的方法！ 首先點選左上方的”New”，會載入一個Create new program的小視窗，上面可以看到Platform，已經帶出NuMaker-IoT-M487。在Template: 這欄選取sample code，使用NuMaker Thermo-Sensor MAX31875這個sample，點一下OK。 現在可以看到sample code已經載入頁面，這份sample code已經內建好使用Sensor設定，可直接按Compile執行編譯程式碼，編譯中需要等待一下，編譯完成後下方會出現"success!"。 系統會把編譯完成的bin檔放在download資料夾， 直接從下方進入，上拉後，點一下”Show in folder”到預設的download夾。 接著需要將 Thermo 6 Click 溫濕度感測器板子插在 MikroBUS 上，注意感測器的方向要正確 再把NuMaker-IoT-M487板子跟PC接上USB，確認板子有亮燈就是通電了。 回到download資料夾，可以看到多了一個剛才compile完成的bin檔，按右鍵傳送到NuMicro MCU(E:) 這邊分配到哪一槽要看各位的電腦決定！有成功點選到的話會出現傳送過去的畫面。 到電腦的裝置管理員查看分配到的port編號，在本機按右鍵，點裝置管理員，找到連接埠(COM和LPT)，找到USB序列裝置，就可以知道像這部PC分配給它的是COM9。 接下來使用終端機模擬軟體，各位可以用自己熟悉的軟體操作即可，設定Serial line為COM9, Speed為115200，到Serial將Flow control 改為None，接著OPEN。 之後在終端機摸擬軟體就可以看到目前的溫濕度感測數值回報等資料。 以上是這次的教學影片，感謝您的收看。 如果您想知道更多資訊歡迎聯絡我們！ - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/numaker-iot-m487 聯絡我們： SalesSupport@nuvoton.com #Tool #Training #Learning #Intermediate #zh-Hant

介紹工控網關的系統架構與功能需求，介紹 NuMicro M487 系列的豐富周邊如何適用於工控網關應用，M487 系列支援的 RTOS，以及新唐所提供的將資料上傳雲端的軟體範例代碼。 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/numaker-iot-m487 聯絡我們： SalesSupport@nuvoton.com

新唐 DALI 燈光控制解決方案實作了基於數位定址燈控介面 (DALI) 技術制定的 IEC 62386 標準。此方案使用新唐自建的 DALI 程式庫可二次開發出各式 DALI 裝置， DALI 程式庫可符合協議標準。新唐現為 DiiA 成員之一，具有 DALI 產品認證經驗。 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/ 聯絡我們： SalesSupport@nuvoton.com

本短片介紹了可符合 AMI 2.0 國際標準的智慧電錶設計。該設計即將在一大型電力公司所服務的供電區域進行大規模部署。同時也透過手機APP演示了遠程線上自動讀錶的功能。 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/ 聯絡我們： SalesSupport@nuvoton.com

具備豐富功能的 NuMaker IoT 物聯網開發平台，經過數種即時作業系統(RTOS)與雲端的認證。在這個影片裡，我們將介紹 NuMaker-IoT-M487 開發板，支援的即時作業系統和雲端，以及物聯網應用示範。 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/ 聯絡我們： SalesSupport@nuvoton.com

以新唐 NuMaker-IoT-M487 為平台，使用Mbed OS進行開發，學習各種功能。觀看本片，您將學會使用NuMaker-IoT-M487開發板配合Mbed OS 範例程式使用 Ethernet連接到伺服器並讀取回傳資料。 哈囉大家好，我是新唐工程師Miya，今天為大家介紹如何使用新唐NuMaker IoT-M487在MbedOS連接Ethernet。 首先打開Chrome瀏覽器，輸入網址 https://ide.mbed.com/，登入後先確認右上方板子已經有帶出”NuMaker-IoT-M487及板子小圖示”了，如果沒有可參考教學影片”step by step讓你了解如何運行Mbed OS”，裡面有詳細的示範怎麼新增板子的方法。 首先點選左上方的”New”，會載入一個Create new program的小視窗 上面可以看到Platform，已經帶出來NuMaker-IoT-M487。 在Template:這欄選取sample code，使用NuMaker Ethernet TCP這個sample，點一下OK，現在可以看到sample code已經載入頁面，這份sample code已經內建寫好連接Ethernet，直接按Compile編譯程式碼 編譯中需要等待一下，編譯完成後下方會出現”success!”。 系統會把編譯完成的bin檔放在download資料夾，直接從下方進入，上拉後，點一下”Show in folder”。 接著在不需要Proxy設定的網段中將網路線接上，再把NuMaker-IoT-M487板子跟PC接上USB，確認板子有亮燈就是通電了。 回到download資料夾，可以看到多了一個剛才compile完成的bin檔，按右鍵傳送到NuMicro MCU(F:)，這邊分配到哪一槽要看各位的電腦決定，有成功點選到的話會出現傳送過去的畫面。 到電腦的裝置管理員查看分配到的port編號，在本機按右鍵，點選裝置管理員，找到連接埠(COM和LPT)，找到USB序列裝置，就可以知道像這部PC分配給它的是COM9。 接下來使用終端機模擬軟體，各位可以用自己熟悉的軟體操作即可，設定Serial line為COM9，Speed為115200，到Serial將Flow control 改為None，接著OPEN。 設定好之後，在板子上按一次reset，接著在終端機摸擬軟體就可以看到目前板子已經成功連接網路，連到的測試網址及收到的回傳訊息等資料。 以上是這次的教學影片，感謝您的收看。 如果您想知道更多資訊歡迎聯絡我們！ - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/numaker-iot-m487 聯絡我們： SalesSupport@nuvoton.com #Tool #Training #Learning #Intermediate #zh-Hant

新唐的 NUC970 及 NUC980 工業控制系列適合用於工業自動化及工業物聯網類型的應用，本影片展示一套由新唐的合作夥伴所設計製造的工業自動化解決方案，包括一套人機交互介面(HMI)及一套遠程終端設備(RTU)。 新唐NUC970、NUC980為一款工業操作溫度範圍，內置DRAM顆粒，採用LQFP包裝的處理器，內建豐富IO介面並包含通訊加解密引擎，為工業通訊安全提供保護。NUC980軟體包則支援聯網協議，包括AWS、阿里雲等，可應用於各種資料採集及聯網需求，特別是針對5G基地台監控、大數據採集，NUC980提供了一套完整的設計方案，詳細內容，請參考新唐官網。 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/numaker-nuc980-iiot 聯絡我們： SalesSupport@nuvoton.com

汽車數據記錄器由NuMicro NUC131微控制器和N9H30微處理器組成。 NUC131支持 CAN 總線接收車載記錄診斷儀II（OBD-II）數據，包括車速，發動機轉速，發動機冷卻液溫度及車內溫度等。接著NUC131轉換OBD-II原始數據，並通過UART將上述信息發送到N9H30。N9H30在7英寸 TFT-LCD emWin 人機界面上顯示接收到的信息。 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/ 聯絡我們： SalesSupport@nuvoton.com

A HMI and RTU industrial automation solution demo which is designed by Nuvoton’s partner. Nuvoton NUC970 series supports 2D Graphic and RGB 24-bit LCD display interface. With different LQFP package and DRAM embedded, NUC970 provides a solution platform for HMI products. NUC980 series does not have graphic engine, but supports up to 10 UARTs with DMA mode. Using DMA mode can reduce CPU loading and provides a better computing requirement. NUC980 series also supports different wireless modules. It is suitable for Industrial IoT applications. #Application #Learning #Basic #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/en/numaker-iiot-nuc980 contact us: SalesSupport@nuvoton.com