search

Product Results:MS51FB9AE, Matches
Keyword Results:MS51FB9AE, 22 Matches

MS51FB9AE



NuMicro® MS51FB9AE is embedded with based on 1T 8051-based CMOS microcontroller, runs up to 24 MHz, features 16 K bytes flash, 1 K bytes SRAM, and 4 K bytes loader ROM for the ISP, also equipped with rich peripherals: 2 sets of UART; 1 set of I²C, and 1 set of SPI, 18 GPIO, 8 channels of 12-bit ADC, Watchdog Timer, Window Watchdog Timer and 6*16-bit PWM channel, package is available in TSSOP20. Target Application: LED lighting Home appliances Industrial control Motor control Battery management system Power supplies Key Features: • Operating Characteristics - Voltage range: 2.4V to 5.5V - Temperature range: - 40 ℃ to + 105 ℃ - EFT 4 kV • Core - 1T 8051-based CMOS microcontroller running up to 24 MHz • Memories - 16 K bytes Flash - Configurable 4 K / 3 K / 2 K / 1 K Bytes of LDROM, which provides flexibility to user developed Boot Code - 1 K bytes SRAM - 256 Bytes on-chip RAM - Flash Memory accumulated with pages of 128 Bytes each - Built-in In-Application-Programmable ( IAP ) • Clocks


MS51FB9AE / Data Sheet



/resource-files/DS_MS51FB9AE_MS51XB9AE_MS51XB9BE_EN_Rev1.pdf MS51FB9AE/ MS51XB9AE/ MS51XB9BE Datasheet DA00-MS51


NuTiny-MS51FB



The NuTiny- MS51FB development board consists of two parts, a NuMicro® 8051 MS51FB9AE platform and an on-board Nu-Link-Me debugger and programmer. The NuTiny- MS51FB allows users to quickly develop and easily program and debug application. The NuTiny- MS51FB offers MS51FB9AE full pins extension connectors and diversified power supply option. It is an easy-to-develop platform for user to expand the functionality and build the applications. The Nu-Link-Me is a debugger and programmer that supports on-line programming and debugging through SWD interface. Additionally, the Nu-Link-Me provides virtual COM port ( VCOM ) function to print out messages on PC. Board Introduction Quick Start Board Features 1. Install the preferred toolchain. Please make sure at least one of the toolchains has been installed. - KEIL C51 - IAR EW8051 2. Download and install the latest Nuvoton Nu-Link Driver. Please install the Nu-Link USB Driver as well at the end of the installation.


FAQ / Can the N76E003AT20 be replaced with the MS51 series?



N76E003, MS51, PCB, Schematic Can the N76E003AT20 be replaced with the MS51 series? 1557110760000 The pin arrangement, pin function and package size of the MS51FB9AE in the MS51 series are fully compatible with those of the N76E003AT20. Therefore, the MS51FB9AE can be directly used instead of the N76E003AT20 without modified any schematics.


NM18002 시리즈



NM18002 is the combination of MCU MS51FB9AE and H-bridge gate driver (30V). It is a product dedicated in single-phase pre driver. User may refer to the TRM and BSP of MS51FB9AE for NM18002 software developing.


MS51BA9AE / Product Brief



/resource-files/PB_MS51_Series_EN_Rev2.00.pdf MS51 Series Product Brief DA03-MS51-1


MS51BA9AE / Board Support Package (BSP)



/resource-files/MS51_Series_BSP_IAR_V1.00.003.zip IAR Board Support Package (BSP) for MS51 Series. SW0120190529175241


MS51BA9AE / Example Code



/resource-files/EC_MS51_Three_Phase_Sine_Wave_V1.00.zip PWM_MS51_Three Phase Sine Wave EC0120191220153742


MS51FB9AE / Example Code



/resource-files/EC_MS51_TLC2543_V1.00.zip GPIO_MS51_TLC2543 EC0120191227194135


MS51BA9AE / Board Support Package (BSP)



/resource-files/en-us--MS51_Series_BSP_Keil_V1.00.005.zip Keil Board Support Package (BSP) for MS51 Series SW1820210825170406


本网站使用cookie作为与网站互动时识别浏览器之用,浏览本网站即表示您同意本网站对cookie的使用及相关隐私权政策