FAQ
- M051 시리즈(95)
- M0518 시리즈(97)
- M0519 시리즈(43)
- M0564 시리즈(1)
- Mini51 시리즈(90)
- Nano100/102 시리즈(101)
- Nano103 시리즈(10)
- Nano110/112 LCD 시리즈(100)
- Nano120 USB 시리즈(111)
- Nano130 어드밴스드 시리즈(110)
- NUC029 시리즈(94)
- NUC100/200 어드밴스드 시리즈(102)
- NUC120/122/123/220 USB 시리즈(116)
- NUC121/125 시리즈(1)
- NUC126 USB 시리즈(2)
- NUC130/230 CAN 시리즈(103)
- NUC131/NUC1311 CAN 시리즈(98)
- NUC140/240 연결(Connectivity) 시리즈(114)
- M451 시리즈(118)
- M451M 시리즈(117)
- M452 USB 시리즈(130)
- M4521 USB 시리즈(1)
- M453 CAN 시리즈(128)
- M463 CAN FD/USB HS 시리즈(1)
- M467 Ethernet/Crypto 시리즈(1)
- M471 시리즈(1)
- M479 Motor Control Series(1)
- M481 시리즈(4)
- M482 USB FS OTG 시리즈(4)
- M483 CAN 시리즈(4)
- M484 USB HS OTG 시리즈(4)
- M485 Crypto 시리즈(4)
- M487 이더넷(Ethernet) 시리즈(4)
- M4TK Touch Key Series(25)
- NUC442/472 시리즈(130)
- NUC472 Series(1)
- NUC505 시리즈(138)
FAQ
What are ISP, ICP and IAP? Issue Date:2015-02-09
ISP stands for "In System Programming". The target chip runs the boot/loader code of LDROM through the peripheral interface such as USB/UART/SPI/I²C/RS-485/CAN... to update the internal APROM, Data Flash and User Configuration Word.
ICP stands for "In Circuit Programming". PC runs the software “NuMicro ICP Programming Tool” through the SWD (serial wire debug) port of Nu-Link circuit to update the internal APROM, LDROM, Data Flash and User Configuration Word of the target chip.
IAP stands for In-application-programming and it is a function for user to switch the code executing between APROM and LDROM without reset. User can enable the IAP function by re-booting chip and setting the chip boot selection bits in CBS (CONFIG0[7:6]) as 2 or 0. When chip boots with the IAP function enabled, any other page within the executable range of code can be mirrored to the first page of executable code (0x0000_0000~0x0000_01FF) any time. User can change the remap address of the first executing page by filling the target remap address to ISPADR and then go through ISP register with the Vector Page Re-map command. After changing the remap address, user can check if the change is successful by reading VECMAP(ISPSTA[20:9]).
(Below figure is the example for executable range of code with IAP Function Enabled of M05xDN/DE series.)
Products: | 마이크로컨트롤러(MCU) ,Arm Cortex-M0 MCUs ,M051 시리즈 ,M0518 시리즈 ,Mini51 시리즈 ,Nano100/102 시리즈 ,Nano110/112 LCD 시리즈 ,Nano120 USB 시리즈 ,Nano130 어드밴스드 시리즈 ,NUC029 시리즈 ,NUC100/200 어드밴스드 시리즈 ,NUC120/122/123/220 USB 시리즈 ,NUC130/230 CAN 시리즈 ,NUC131/NUC1311 CAN 시리즈 ,NUC140/240 연결(Connectivity) 시리즈 ,Arm Cortex-M4 MCUs ,M451 시리즈 ,M451M 시리즈 ,M452 USB 시리즈 ,M453 CAN 시리즈 ,NUC442/472 시리즈 ,NUC505 시리즈 |
---|---|
Applications: | |
Function: | Peripherals,Memory,APROM,Config,Data Flash,Flash Memory Controller (FMC),LDROM,Software and Tools,Nu Tools,In Circuit Programming (ICP) Tool,In System Programming (ISP) Tool |