常见问答
- M051 系列(95)
- M0518 系列(97)
- M0519 系列(43)
- M0564 系列(1)
- Mini51 系列(90)
- Nano100 / 102 系列(101)
- Nano103 Base 系列(10)
- Nano110 / 112 LCD 系列(100)
- Nano120 USB 系列(111)
- Nano130 USB+LCD 系列(110)
- NUC029 系列(94)
- NUC100 / 200 系列(102)
- NUC120 / 122 / 123 / 220 USB 系列(116)
- NUC121/125 系列(1)
- NUC126 USB 系列(2)
- NUC130 / 230 CAN 系列(103)
- NUC131/NUC1311 CAN 系列(98)
- NUC140 / 240 USB+CAN 系列(114)
- M451 Base 系列(118)
- M451M 系列(117)
- M452 USB 系列(130)
- M4521 USB 系列(1)
- M453 CAN 系列(128)
- M463 CAN FD/USB HS 系列(1)
- M467 Ethernet/Crypto 系列(1)
- M471 系列(1)
- M479 Motor Control Series(1)
- M481 Base 系列(4)
- M482 USB FS OTG 系列(4)
- M483 CAN 系列(4)
- M484 USB HS OTG 系列(4)
- M485 Crypto 系列(4)
- M487 Ethernet 系列(4)
- M4TK 触摸 IC 系列(25)
- NUC442 / 472 系列(130)
- NUC472 Series(1)
- NUC505 系列(138)
产品
功能
+
よくある質問
What is the default state of General Purpose Input/Output (GPIO) after reset? 日付:2015-02-10
The default state of GPIO after reset may vary depending on the product series.
The state of GPIO for M051 BN and NUC100 Series is in Quasi-bidirectional mode with weakly pull-high resistor (110 kΩ~300 kΩ), and the state of GPIO for Mini51 and Nano100 Series is in Input mode.
However, the state of GPIO for M051 DN/DE and NUC200 Series depends on the setting of CIOINI (Config0[10]). If CIOINI is set to 1, all pins will be in Quasi-bidirectional mode after reset. If CIOINI is cleared to 0, all pins will be Input mode after reset.