NK-NM18407L
- Install the preferred toolchain. Ensure that at least one of the following toolchains is installed:
- Download and install the latest Nuvoton Nu-Link driver:
- For Keil MDK: Download and install Nu-Link_Keil_Driver.
- For IAR EWARM: Download and install Nu-Link_IAR_Driver.
- Download and extract the Board Support Package (BSP) or Motor Drive Example Code.
- Hardware Setup
- Connect the Nu-Link-Me connector (JP1) to the PC's USB port using a USB cable.
- Connect the J63/J52 (U), J64/J53 (V), J65/J57 (W) connectors and the J41 (Hall Sensor) connector to the motor's U/V/W terminals and Hall sensor.
- Connect the J46 connectors to the power supply.
- Find the "Template.uvprojx" project file in the example code folder.
- [Example Code] NM18407 based Sensorless FOC for Fan Appl_Rev1.0
- SW
- SampleCode
- Template
- Keil
- Template.uvprojx
- Keil
- Template
- SampleCode
- SW
- [Example Code] NM18407 based Sensorless FOC for Fan Appl_Rev1.0
- Open and execute the project in the toolchain. For detailed settings, please refer to "UM_NM1244 based Sensorless FOC_Rev1.1_EN", "Introduction of Sensoless FOC based on SMO".
- After setting all the required parameters, turn on the VR or VSP to run the motor and verify its performance.
粤公网安备 44030502010001号