NK-NM18002L
- Install the preferred toolchain. Ensure that at least one of the following toolchains is installed:
- Download and install the latest Nuvoton Nu-Link driver:
- For Keil MDK: Download and install Nu-Link_Keil_Driver.
- For IAR EWARM: Download and install Nu-Link_IAR_Driver.
- Download and extract the Board Support Package (BSP) or Motor Drive Example Code.
- Hardware Setup
- Connect the Nu-Link-Me connector (JP12) to the PC's USB port using a USB cable.
- Connect the JP2 (U/V) connector and the J1 (Hall Sensor/Hall Element) to the motor's U/V terminals and Hall sensor/Hall Element.
- Connect the J2/Vin and J4/GND connector to the power supply.
- Find the "Template.uvprojx" project file in the example code folder.
- [Example Code] NM18002 based Sensor Square-wave Drive for Server Fan Appl_Rev1.0
- SW
- SampleCode
- Template
- Keil
- Project.uvprojx
- Keil
- Template
- SampleCode
- SW
- [Example Code] NM18002 based Sensor Square-wave Drive for Server Fan Appl_Rev1.0
- Open and execute the project in the toolchain. For detailed settings, please refer to " UM_NuMotor NK-NM18002L_Rev0.01".
- After setting all the required parameters, turn on the VR to run the motor and verify its performance.
粤公网安备 44030502010001号