本影片將引導使用者快速建立 N9H30 non-OS 開發環境，並使用 SEGGER emWin AppWizard 工具進行 GUI 設計。同時也會介紹如何使用 J-Link 進入 Debug mode，且透過 NuWriter 將 AppWizard 專案部署到 NuMaker-HMI-N9H30 開發板執行。 #emWinAppWizard #MPU #N9H #N9H30 #Non-OS #HMI #GUIdesign #QuickStart #NuWriter #J-Link #Debug #Basic #Training #Learning #zh-Hant - 更多產品資訊，請至新唐科技網站 https://www.nuvoton.com/?utm_source=youtube&utm_medium=video&utm_campaign=all 購買管道：https://direct.nuvoton.com/tw 聯絡我們：SalesSupport@nuvoton.com

This video will guide users to quickly start developing Nuvoton N9H30 series microcontroller in a non-OS environment, and will demonstrate a GUI design by SEGGER emWin AppWizard tool. This video also shows how to enter the debug mode with J-Link and deploy the AppWizard project to the NuMaker-HMI-N9H30 evaluation board by NuWriter. #emWinAppWizard #MPU #N9H #N9H30 #NonOS #HMI #GUIdesign #QuickStart #NuWriter #JLink #Debug #Basic #Training #Learning #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

AppWizard is a graphic human-machine interface design tool that supports the emWin graphics library. This tool allows GUI design and development to be completed with minimal coding using a drag-and-drop interface and settings. This demo showcases the use of the AppWizard tool with the M467 development platform to design an electric bicycle dashboard interface. Therefore, the video will be divided into two parts: the M467 development platform introduction and the key features of the AppWizard. #en #Product #Application #General #Seminar #2023 Roadshow #Nuvoton #Nuvoton #E-bike #Dashboard #emWin AppWizard #NuMicro #MCU #M467 - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

Hello everyone. Welcome back to Nuvootn’s YouTube channel. This is a reference design of a thermostat made by Nuvoton. The first screen shows the current room temperature of 25 degrees Celsius. You can also set your target temperature through the control panel. The middle switch is the power switch of temperature control. Press the Temperature icon and you can adjust backlight brightness by slide control. Back to the function page, press the Snow icon where you can change the strength of the air conditioner. You can increase or decrease the strength by these up and down arrows or you can press the snow icon for adjustment. Changing the heater, dehumidifier, and fan are the same. The third page is a calendar where you can set the date to book opening and closing the temperature control. What you saw is the reference design introduction. Now let’s talk about the composition of the board. In the middle of the board is a Nuvoton N9H20 main control chip. This main control chip has built-in 32 Mbytes DDR so the board is very clear and the hardware design is easy. At the top side, there is a 1 Gbits NAND Flash for code and pictures storage. At the bottom left there is a connector to the UART control interface. In the middle left area, there is a 5 Voltage (Micro USB) power input. In the upper right corner, there is an RS485 connection. Through this green connector, you can connect to RS485 for fans, air conditioners, and other devices' control. In the lower right corner, there is a chip for power IC and some other parts. The application reference design is concise and powerful. That’s all for the hardware introduction. Thank you for watching. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com contact us: SalesSupport@nuvoton.com #Product #Application #Learning #Intermediate #en

This reference design is based on NuMicro M480 series which control a 2” OLED display. It provides an easy method for a graphical user interface (GUI) with emWin library. As you can see, the microcontroller controls the 2-inch OLED screen and GIF files can be played on it. The M480 series runs up to 192 MHz with 512 KB embedded Flash memory and 160 KB embedded SRAM. The high-performance MCU decodes GIF motion graphics smoothly. There are three major features about this reference design: First: We use the Nuvoton M480 high-performance microcontroller to control the OLED through high-speed SPI to showcase dynamic effects. Second: This solution has built-in GIF decoding and various font libraries. If there are other font requirements, you can load other fonts through the Nuvoton font conversion tool, and use the emWin Library to develop a high-quality user interface quickly. Third: It can be applied to products requiring display functions, such as e-sports motherboards, which can dynamically display temperature, the speed of the fan and the status of the hard disk. The OLED device has a 2-inch OLED screen with a resolution of 256*64. There is an SD card slot underneath, which obviously is for data storage and the storage status is shown on the OLED screen. The right side, there is a high-speed USB for PC connection as a flash drive. A headphone jack is on the left, I’m sure you all know how it works. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Contact us: SalesSupport@nuvoton.com 本方案使用 NuMicro M480 高效能 M4 微控制器，搭配 emWin library 進行 GUI 圖像化人機介面設計，將結果顯示在 2” OLED 上。NuMicro M480 系列微控制器是新唐的最新產品，透過這個系列產品高達 192 MHz 的強大運算能力和多達 160 KB 的 SRAM，並且搭配 2 吋 OLED 螢幕，來達到流暢地解碼及播放 GIF 動態影像，那這個方案包含了三大重點： 第一點：我們使用了新唐 M480 高效能微控制器，透過高速 SPI 控制 OLED 來顯示炫麗的動態效果 第二點：本方案已內建 GIF 解碼和多種字型的 Library，如果有其他字型需求，可以透過新唐字型轉換工具載入其他字庫，再加上 emWin Library 的使用，快速開發完成高質感使用者介面。 第三點：本方案可以應用於有顯示功能需求的產品，如電競主機板，可以高效地動態顯示溫度、風扇轉速和硬碟狀態等 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 聯絡我們：SalesSupport@nuvoton.com