常见问答
- M051 系列(95)
- M0518 系列(97)
- M0519 系列(43)
- M0564 系列(1)
- Mini51 系列(90)
- Nano100 / 102 系列(101)
- Nano103 Base 系列(10)
- Nano110 / 112 LCD 系列(100)
- Nano120 USB 系列(111)
- Nano130 USB+LCD 系列(110)
- NUC029 系列(94)
- NUC100 / 200 系列(102)
- NUC120 / 122 / 123 / 220 USB 系列(116)
- NUC121/125 系列(1)
- NUC126 USB 系列(2)
- NUC130 / 230 CAN 系列(103)
- NUC131/NUC1311 CAN 系列(98)
- NUC140 / 240 USB+CAN 系列(114)
- M451 Base 系列(118)
- M451M 系列(117)
- M452 USB 系列(130)
- M4521 USB 系列(1)
- M453 CAN 系列(128)
- M463 CAN FD/USB HS 系列(1)
- M467 Ethernet/Crypto 系列(1)
- M471 系列(1)
- M479 Motor Control Series(1)
- M481 Base 系列(4)
- M482 USB FS OTG 系列(4)
- M483 CAN 系列(4)
- M484 USB HS OTG 系列(4)
- M485 Crypto 系列(4)
- M487 Ethernet 系列(4)
- M4TK 触摸 IC 系列(25)
- NUC442 / 472 系列(130)
- NUC472 Series(1)
- NUC505 系列(138)
产品
功能
+
Häufig gestellte Fragen
How to enable configurable Data Flash and set the size in the IAR Embedded Workbench for ARM development environment? Datum：2018-01-16
In the NuMicro® family, if the Data Flash size is configurable, its size is shared with the APROM. To configure Data Flash, please follow the steps below:
1. Select Nu-Link à ICP Programming Tool
2. Select Target Chip for the ICP Tool;
3. Click “Continue” button;
4. Click “Setting” button to open the Chip Options form;
5. Enable “Data Flash”;
6. Set the Data Flash size;
7. Enable “Config” for programming according to the config values.
| Produkte: | Mikrocontroller ,8-bit-8051-MCUs ,Arm Cortex-M0-MCUs ,Arm Cortex-M4-MCUs |
|---|---|
| Applikationen: | |
| Funktion: | Peripherals,Memory,Config,Data Flash,Flash Memory Controller (FMC),Software and Tools,Development-Environment,IAR,Nu Tools,In Circuit Programming (ICP) Tool |
粤公网安备 44030502010001号