Nuvoton has provided all kinds of size panels from 3.5 to 7 inches that support i80 mode and RGB interface to show GUI. N9H series supports hardware 2D Graphics Accelerator and MJPEG codec to process images. To meet customers HMI needs, Nuvoton has already prepared low-end to high-end products including M0, M4, and Arm9 series. #Product #Learning #Basic #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/en/numaker-hmi-n9h30 contact us: SalesSupport@nuvoton.com 0:00 簡介 1:32 Nuvoton HMI Solutions 3:04 Nuvoton HMI Development Systems 4:40 emWin Supported HMI Solution 5:29 Nuvoton Homemade Free GUI Templates 5:55 HMI Successful Story 7:15 Nuvoton MCU Feature for GUI 7:58 NuMicro N9H Series 9:26 NuMicro M480 Series 10:26 What is HMI and emWin Library 11:01 Windows Tools 12:34 Use GUIBuilder to easily create GUI 13:32 em Win sample code path in Nuvoton BSP 13:54 How to build the project • Both of the BSP and hardware are right, the display should 14:10 Nuvoton Forum 14:57 Supported LCD driver IC List (the popular ones)

以新唐 NuMaker-IoT-M263A 為平台，使用 Mbed OS 進行開發，學習開發各式功能。觀看本片，您將學會如何以 Mbed OS 範例程式完成按鍵開關 LED 功能。 哈囉大家好，我是新唐工程師 Miya，今天為大家介紹如何使用新唐 NuMaker IoT-M263A 在 Mbed OS 控制 LED 與按鍵。 首先打開 Chrome 瀏覽器，輸入網址"https://ide.mbed.com/compiler"。 登入後先確認右上方板子已經出現”NuMaker-IoT-M263A 及板子小圖示”，如果沒有出現，可參考新唐 IoT 系列課程”三分鐘讓你了解如何運行 Mbed OS”，這部影片裡面有詳細示範怎麼新增板子的方法喔! 首先點選左上方的 ”New”，會載入一個 ”Create new program” 的小視窗，在上面可以看到 Platform 已經帶出來 NuMaker-IoT-M263A，在 Template 這欄選取 sample code，用 NuMaker GPIO Interrupt with Debounce Setting 這個 sample 來示範，點一下 OK。 現在可以看到 sample code 已經載入頁面，點一下 main.cpp，往下拉找到這份 sample code 設置 M263A 板子的 LED 按鈕開關，對應是 SW10，直接按一下 Compile 編譯檔案。目前正在 Compile 中，請稍後。 完成後可以看到頁面下方出現了說明描述，最下面會秀出 Success! 系統會把編譯完成的 bin 檔放在 download 資料夾，直接從下方進入，上拉後，點一下”在資料夾中顯示”。 接著需要把 NuMaker-IoT-M263A 板子透過 USB 接上 PC，確認板子有亮燈就是通電了。 回到剛才的資料夾，可以看到多了一個剛才 compile 完成的 bin 檔，按右鍵傳送到 NuMicro MCU(E:) 這邊分配到哪一槽要看各位的電腦決定喔！成功點選會出現傳送資料的畫面。 接下來按板子上的 SW10 按鈕來開關相對應的 LED，可以看到每次按下的動作，預設是開，再按一下就是關。 以上是這次的教學影片，感謝您的收看。歡迎訂閱我們的頻道。 如果您想知道更多資訊歡迎聯絡我們！ - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/numaker-iot-m263a 聯絡我們： SalesSupport@nuvoton.com #application #learning #intermediate #zh-Hant

以新唐 NuMaker NUC980 IIoT 為平台，使用 Linux 進行開發，學習開發各式功能，觀看本片，您將學會如何控制 GPIO 使 LED 閃爍。 哈囉大家好，我是新唐工程師 Kevin，今天為大家介紹如何在 NuMaker NUC980 IIoT 板子上透過 GPIO 讓 LED 燈閃爍。 NuMaker NUC980 IIoT 板子的 Power-on Setting上方有 3 個 LED 燈，分別由不同的 GPIO 控制。最左邊，編號 LED03 的 LED 燈是由 GPIO B8 這根 pin 控制。今天示範如何用程式控制 GPIO B8 讓 LED 燈閃爍。 這是 LED 燈閃爍的程式，在看程式之前，我先為各位說明，在 Linux kernel 中，每一根 GPIO pin 都有編號。每一個 GPIO Group 占用 32個編號，編號為 0 到 31，分配給 GPIO Port A 這個 group，編號 32 到 63 分配給 GPIO Port B，以此類推。 LED03 這個 LED 燈是由 GPIO B8 這根 pin 控制，GPIO B8 在 Linux 中的編號是 40。 回到程式中，我們看到這個程式是透過 system function 執行系統命令，透過 Linux kernel 的 sysfs 控制 GPIO。 第 23 行 system("echo40 /sys/class/gpio/export"); 是將 GPIO B8 設定成可以用sysfs 控制。 第 24 行 system("echo out /sys/class/gpio/gpio40/direction"); 是將 GPIO B8 設定為 output。 接下來在 while loop 中，透過 system("echo 1/sys/class/gpio/gpio40/value"); 讓 GPIO B8 輸出 high；再透過 system("echo 0 /sys/class/gpio/gpio40/value"); 讓 GPIO B8 輸出 low，中間延遲 1 秒鐘，就可以做到 LED 燈閃爍的功能。 這個程式，main.c，儲存後，進行 compile 輸入 arm-linux-gcc main.c -o gpio_toggle (輸入 ls) 產生一個執行檔 gpio_toggle 將 gpio_toggle 拷貝到 root file system 目錄中， (輸入 sudo cp gpio_toggle ../rootfs) 然後重新 compile Linux Kernel 透過 NuWriter 將 Linux kernel 下載到NuMaker NUC980 IIoT 板子上執行 Linux Kernel 開機完成後，輸入 ./gpio_toggle，執行閃爍 LED 的程式。 此時可以看到 NuMaker NUC980 IIoT 板子上的 LED 正在閃爍。 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/numaker-nuc980-iiot 聯絡我們： SalesSupport@nuvoton.com

Secure Smart Metering Communication Reference Design Hi everybody, today we are going to introduce a reference design of Smart-Metering communication card based on NuMicro M2351 Series microcontroller. You can find useful security features based on the Arm Cortex-M23 CPU core with Nuvoton’s in-house technology integration. The auto-metering is an infrastructure for automatic, remotely, wire or wireless meter data reading. It’s highly possible to be intervened if there is no security mechanism. That is a very typical IoT security issue in the IoT era. In many countries, there are a lot of Auto-Metering Infrastructure (AMI) projects being undertaken by main electricity power companies worldwide. Most projects start from upgrading the communication modem cards as the first step rather than retiring the meters. The modem card can play as a gateway to monitor the incorrect device operation and data transmission security. Issues of modem card security are covering: First, a limited performance due to crypto computation efficiency Second, speed limitation due to interface choice The third, cost burden due to extra hardware modules for different communication protocols Nuvoton’s reference design of Secure Smart Meter Communication is an end-to-end security solution for AMI. With the collaboration with SPI-Korea, the solution incorporates a lot of advantages such as TrustZone security for firmware, a range of interfaces for device communication, secure over-the-air firmware update, and remote management. With the complete hardware specification of M2351, a security software company, SPI-Korea, can easily implement their secure AMI solution for modem card which connects meters and cloud servers. M2351 also contributes the crypto acceleration during the cryptographic computing in order to save CPU time for different communication protocol modules by its powerful hardware functionalities during message transmission outside of a microcontroller unit. SPI-Korea has developed a range of Armv8-M TrustZone based technologies. Her expertise covers Boot Manager, Key Manager, and Device Manager, which is very useful for microcontroller security and certainly shows the stability of a microcontroller device. Also, they are certified by Korea Electricity Company. We hope this successful experience can be further adopted in other areas worldwide because it’s a secure, accurate and environmentally safe solution for AMI. This slide is a picture for SPI-Korea AMI modem card design. NuMicro Family microcontrollers can be utilized for designs of auto-metering infrastructure devices. We start from AMI modem card and we are confident to support meters of any next-generation of AMI. We now integrate M23-based microcontroller with M4-based or Arm9-based microcontroller as a proposal for next-generation modem card of Korea AMI and we hope to provide high-performing cost-effective solution for all AMI devices in the future. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC contact us: SalesSupport@nuvoton.com

以新唐 NuMaker-IoT-M487 與 AliOS Things 為平台進行開發，學習開發各式功能。觀看本片，您將學會如何以 AliOS Things 範例程式輸出 Hello World 與按鍵開關 LED 功能。 大家好，我是新唐工程師Wayne，現在為您介紹新唐 IoT 系列課程主題 - 讓您了解如何運行 AliOS-Things 操作系統。在這部影片中，我們將呈現如何下載 AliOS-Things 軟體開發包、AliOS-Things 範例專案編譯、執行檔案的燒錄下載以及功能測試。 首先打開瀏覽器，並在網址列輸入 AliOS-Things 原始碼倉庫網址，網址如下 - https://github.com/OpenNuvoton/AliOS-Things。連接。瀏覽器畫面目前顯示的是 AliOS-Things 軟體開發包，點選” Clone or download”按鍵，再點選 “Download ZIP”，電腦就開始下載AliOS-Things 軟體開發包了。 在完成下載 AliOS-Things 軟體開發包後，它是一個 zip 格式的檔案，需要進行解壓縮。 在 AliOS-Things 軟體開發包解壓縮完成後，找到numicro_button_led keil 專案檔案。它的路徑如下-projects\Keil\numicro_button_led@numaker-iot-m487\keil_project，打開Keil專案檔，點擊 Rebuild 圖示編譯專案。 在編譯成功後，它將產生一個可執行檔案在Objects目錄內，完整檔案路徑如下：projects\Keil\numicro_button_led@numaker-iot-m487\keil_project\Objects，輸出的檔案名稱為numicro_button_led@numaker-iot-m487.bin。 接下來，我們開始進行可執行檔案的燒錄下載，在這之前，我們先確認開發板上的 ISW1開關元件，都切至 “ON”的位置。 接著將USB 線插上電腦。這時侯我的電腦出現一個 NuMicro MCU 磁碟機。磁碟機代號依不同電腦而不同，這台電腦顯示為 G 槽。我們回到可執行檔案儲放的目錄，在可執行檔案numicro_button_led@numaker-iot-m487.bin上，按下滑鼠右鍵，傳送到 NuMicro MCU 磁碟機，然後畫面出現檔案傳輸視窗，等到傳輸完成後，也結束燒錄下載流程。 我們開啟 Tera term 終端模擬連線工具，序列埠選擇 Nuvoton Virtual Com Port 編號- COM5，其它的連接埠設定如畫面呈現。 在完成設定後，點選確定並按下開發板上的 Reset 按鍵。Tera term將印出 AliOS-Things 的開機資訊與每秒印出 hello world 的字樣，這時侯您可按下開發板上的 SW2 按鍵切換 LEDR 燈的狀態。到這裡，我們完成了測試。 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/numaker-iot-m487 聯絡我們： SalesSupport@nuvoton.com #Tool #Training #Learning #Intermediate #zh-Hant

以新唐 NuMaker-IoT-M487 為平台，使用 Mbed OS 進行開發，學習開發各式功能。觀看本片，您將學會如何以 Mbed OS 範例程式完成按鍵開關 LED 功能。 哈囉大家好，我是新唐工程師Miya，今天為大家介紹如何使用新唐NuMaker-IoT-M487在Mbed OS控制LED與按鍵。 首先打開Chrome瀏覽器，輸入網址https://ide.mbed.com/。 登入後先確認右上方板子已經出現“NuMaker-IoT-M487及板子小圖示”，如果沒有出現，可參考新唐IoT系列課程三分鐘讓你了解如何運行Mbed OS”，這部影片裡面有詳細示範怎麼新增板子的方法喔！ 首先點選左上方的“New”，會載入一個“Create new program” 的小視窗，在上面可以看到Platform已經帶出來NuMaker-IoT-M487，在Template這欄選取sample code，用NuMaker GPIO Interrupt with Debounce Setting這個sample來示範，點一下OK。 現在可以看到sample code已經載入頁面，點一下main.cpp，這份sample code已經內建寫好SW2按鈕開關，直接按一下Compile output，目前正在Compile中，請稍後。 完成後可以看到頁面下方出現了多行描述，最下面會秀出Success！ 系統會把我們compile完成的bin檔放在download資料夾，我們可以直接從下方進入，上拉後，點一下“Show in folder” 接著我們需要先把NuMaker-IoT-M487板子跟透過USB接上PC，確認板子有亮燈就是通電了。 回到剛才的資料夾，可以看到多了一個剛才compile完成的bin檔，按右鍵傳送到NuMicro MCU(E:) 這邊分配到哪一槽要看各位的電腦決定喔！ 成功點選會出現傳送資料的畫面。 接下來按板子上的SW2按鈕來開關相對應的LED，可以看到每次按下的動作，第一下是開/第二下就是關。 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/numaker-iot-m487 聯絡我們： SalesSupport@nuvoton.com #Tool #Training #Learning #Intermediate #zh-Hant

．Why FIDO Authentication ．Security Device for Personal Identity ．USB Dongles Usage ．M2351 USB FIDO Key SDK ．Support Capacitive Fingerprint Sensors ．M2351 USB FIDO Key with TrustZone ．Values Brought by M2351 ．Collaborative Software Development ．An Open Platform with Content Protection ．Leading Market Position for Software Protection For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC #Product #Learning #Basic #en 0:00 簡介 0:28 Why FIDO Authentication 1:19 Security Device for Personal Identity 2:01 USB Dongles Usage 2:29 M2351 USB FIDO Key SDK 3:36 M2351 USB FIDO Key with TrustZone 4:07 Values Brought by M2351 4:55 Collaborative Software Development (2) 6:10 An Open Platform with Content Protection

NUC980 Series Microprocessor is a solution designed for industrial control and industrial IoT applications, such as gateway, serial server, remote control unit, plug and play data collector and IoT development platforms. NUC980 series embedded with an ARM9 core supports Linux, FreeRTOS and Non-OS Board Supporting Package. By using MCP technology, NUC980 series supports up to 128 MB DRAM. Not only can NUC980 simplify your hardware design, but help your product time to market. A less-layered PCB and a reduced PCB size can lower the BOM cost. NUC980 supports 2 High Speed and 6 Full Speed USB Host controllers that can be used for a replaceable module due to the plug and play feature of USB interface. Other interfaces include 10 UART, 4 I2C, 3 SPI, 4 CAN BUS, and 2 Camera sensor interface. Designers can use these interfaces to collect or convert the data needed. NUC980 features AES, RSA, SHA and ECC hardware crypto accelerator for CPU offloading. This crypto engine can be applied at data transfer, identification, and key exchange.Nuvoton also provides IoT protocols like HTTP, HTTPS, MQTT, CoAP, openSSL to help customers accomplish a security IoT platform easily. Nuvoton NUC980 adopts MCP technology supporting up to 128 MB DRAM. Developers can design a secure IoT product fast and convenient with the help of the hardware crypto engine. Next, I will introduce related development platforms. NuMaker NUC980 Serial Server Board is suitable for applications like serial server or serial to Ethernet gateways. This develop board includes 2 10/100 Ethernet ports, 8 UART ports, 1 MicroSD Slot, 2 USB ports and 16MB SPI NOR Flash. NuMaker NUC980 USB developer board is suitable for data collection applications. This board includes 1 10/100 Ethernet port, 8 USB ports, 5 UART ports, and 128 MB NAND Flash. NuMaker NUC980 Industrial IOT developer board is suitable for IOT applications. This board includes 1 10/100 Ethernet Port, 2 USB ports, microphone input, earphone output, 128 MB SPI NAND Flash and an Arduino Compatible interface. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: http://direct.nuvoton.com/arm9-mpus/ contact us: SalesSupport@nuvoton.com #Product #Learning #Basic #en

This reference design is based on NuMicro M480 series which control a 2” OLED display. It provides an easy method for a graphical user interface (GUI) with emWin library. As you can see, the microcontroller controls the 2-inch OLED screen and GIF files can be played on it. The M480 series runs up to 192 MHz with 512 KB embedded Flash memory and 160 KB embedded SRAM. The high-performance MCU decodes GIF motion graphics smoothly. There are three major features about this reference design: First: We use the Nuvoton M480 high-performance microcontroller to control the OLED through high-speed SPI to showcase dynamic effects. Second: This solution has built-in GIF decoding and various font libraries. If there are other font requirements, you can load other fonts through the Nuvoton font conversion tool, and use the emWin Library to develop a high-quality user interface quickly. Third: It can be applied to products requiring display functions, such as e-sports motherboards, which can dynamically display temperature, the speed of the fan and the status of the hard disk. The OLED device has a 2-inch OLED screen with a resolution of 256*64. There is an SD card slot underneath, which obviously is for data storage and the storage status is shown on the OLED screen. The right side, there is a high-speed USB for PC connection as a flash drive. A headphone jack is on the left, I’m sure you all know how it works. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Contact us: SalesSupport@nuvoton.com 本方案使用 NuMicro M480 高效能 M4 微控制器，搭配 emWin library 進行 GUI 圖像化人機介面設計，將結果顯示在 2” OLED 上。NuMicro M480 系列微控制器是新唐的最新產品，透過這個系列產品高達 192 MHz 的強大運算能力和多達 160 KB 的 SRAM，並且搭配 2 吋 OLED 螢幕，來達到流暢地解碼及播放 GIF 動態影像，那這個方案包含了三大重點： 第一點：我們使用了新唐 M480 高效能微控制器，透過高速 SPI 控制 OLED 來顯示炫麗的動態效果 第二點：本方案已內建 GIF 解碼和多種字型的 Library，如果有其他字型需求，可以透過新唐字型轉換工具載入其他字庫，再加上 emWin Library 的使用，快速開發完成高質感使用者介面。 第三點：本方案可以應用於有顯示功能需求的產品，如電競主機板，可以高效地動態顯示溫度、風扇轉速和硬碟狀態等 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 聯絡我們：SalesSupport@nuvoton.com

本方案使用 NuMicro M480 高效能 M4 微控制器，搭配 emWin library 進行 GUI 圖像化人機介面設計，將結果顯示在 2” OLED 上。NuMicro M480 系列微控制器是新唐的最新產品，透過這個系列產品高達 192 MHz 的強大運算能力和多達 160 KB 的 SRAM，並且搭配 2 吋 OLED 螢幕，來達到流暢地解碼及播放 GIF 動態影像，那這個方案包含了三大重點： 第一點：我們使用了新唐 M480 高效能微控制器，透過高速 SPI 控制 OLED 來顯示炫麗的動態效果 第二點：本方案已內建 GIF 解碼和多種字型的 Library，如果有其他字型需求，可以透過新唐字型轉換工具載入其他字庫，再加上 emWin Library 的使用，快速開發完成高質感使用者介面。 第三點：本方案可以應用於有顯示功能需求的產品，如電競主機板，可以高效地動態顯示溫度、風扇轉速和硬碟狀態等 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 聯絡我們：SalesSupport@nuvoton.com ---- Today we are going to introduce our reference design OLED Display with GIF Format Decode featuring the NuMicro M480 series microcontroller. As you can see, the microcontroller controls the 2-inch OLED screen and GIF files can be played on it. The M480 series runs up to 192 MHz with 512 KB embedded Flash memory and 160 KB embedded SRAM. The high-performance MCU decodes GIF motion graphics smoothly. There are three major features about this reference design: First: We use the Nuvoton M480 high-performance microcontroller to control the OLED through high-speed SPI to showcase dynamic effects. Second: This solution has built-in GIF decoding and various font libraries. If there are other font requirements, you can load other fonts through the Nuvoton font conversion tool, and use the emWin Library to develop a high-quality user interface quickly. Third: It can be applied to products requiring display functions, such as e-sports motherboards, which can dynamically display temperature, the speed of the fan and the status of the hard disk. The OLED device has a 2-inch OLED screen with a resolution of 256*64. There is an SD card slot underneath, which obviously is for data storage and the storage status is shown on the OLED screen. The right side, there is a high-speed USB for PC connection as a flash drive. A headphone jack is on the left, I’m sure you all know how it works.

● How to buy: https://direct.nuvoton.com/en/search?controller=search&orderby=position&orderway=desc&search_query=+emWin+&submit_search= ● More information: https://www.nuvoton.com/hq/products/application-specific-socs/hmi-emwin-mpus/-n9h-series

Voice controlled electronic devices have become a popular trend. The advantage is that electronic devices can be controlled without hands. For this scheme, we use Google TensorFlow as the algorithm development environment of speech recognition for deep learning. Then we implement speech recognition on NuMaker-PFM-M487 platform, and realize an offline and instant speech recognition system by Keyword Spotting. Nuvoton Website: www.nuvoton.com