 |
M480 BSP
V3.05.001
The Board Support Package for M480 Series
|
|
M480 BSP
V3.05.001
The Board Support Package for M480 Series
|
M480 series USCI UART (UUART) driver header file. More...
Go to the source code of this file.
Macros | |
| #define | UUART_WORD_LEN_6 |
| #define | UUART_WORD_LEN_7 |
| #define | UUART_WORD_LEN_8 |
| #define | UUART_WORD_LEN_9 |
| #define | UUART_PARITY_NONE |
| #define | UUART_PARITY_ODD |
| #define | UUART_PARITY_EVEN |
| #define | UUART_STOP_BIT_1 |
| #define | UUART_STOP_BIT_2 |
| #define | UUART_ABR_INT_MASK |
| #define | UUART_RLS_INT_MASK |
| #define | UUART_BUF_RXOV_INT_MASK |
| #define | UUART_TXST_INT_MASK |
| #define | UUART_TXEND_INT_MASK |
| #define | UUART_RXST_INT_MASK |
| #define | UUART_RXEND_INT_MASK |
| #define | UUART_WRITE(uuart, u8Data) |
| Write USCI_UART data. More... | |
| #define | UUART_READ(uuart) |
| Read USCI_UART data. More... | |
| #define | UUART_GET_TX_EMPTY(uuart) |
| Get Tx empty. More... | |
| #define | UUART_GET_RX_EMPTY(uuart) |
| Get Rx empty. More... | |
| #define | UUART_IS_TX_EMPTY(uuart) |
| Check specified usci_uart port transmission is over. More... | |
| #define | UUART_IS_RX_EMPTY(uuart) |
| Check specified usci_uart port receiver is empty. More... | |
| #define | UUART_WAIT_TX_EMPTY(uuart) |
| Wait specified usci_uart port transmission is over. More... | |
| #define | UUART_IS_TX_FULL(uuart) |
| Check TX buffer is full or not. More... | |
| #define | UUART_IS_RX_FULL(uuart) |
| Check RX buffer is full or not. More... | |
| #define | UUART_GET_TX_FULL(uuart) |
| Get Tx full register value. More... | |
| #define | UUART_GET_RX_FULL(uuart) |
| Get Rx full register value. More... | |
| #define | UUART_ENABLE_PROT_INT(uuart, u32IntSel) |
| Enable specified USCI_UART protocol interrupt. More... | |
| #define | UUART_DISABLE_PROT_INT(uuart, u32IntSel) |
| Disable specified USCI_UART protocol interrupt. More... | |
| #define | UUART_ENABLE_BUF_INT(uuart, u32IntSel) |
| Enable specified USCI_UART buffer interrupt. More... | |
| #define | UUART_DISABLE_BUF_INT(uuart, u32IntSel) |
| Disable specified USCI_UART buffer interrupt. More... | |
| #define | UUART_ENABLE_TRANS_INT(uuart, u32IntSel) |
| Enable specified USCI_UART transfer interrupt. More... | |
| #define | UUART_DISABLE_TRANS_INT(uuart, u32IntSel) |
| Disable specified USCI_UART transfer interrupt. More... | |
| #define | UUART_GET_PROT_STATUS(uuart) |
| Get protocol interrupt flag/status. More... | |
| #define | UUART_CLR_PROT_INT_FLAG(uuart, u32IntTypeFlag) |
| Clear specified protocol interrupt flag. More... | |
| #define | UUART_GET_BUF_STATUS(uuart) |
| Get transmit/receive buffer interrupt flag/status. More... | |
| #define | UUART_CLR_BUF_INT_FLAG(uuart, u32IntTypeFlag) |
| Clear specified buffer interrupt flag. More... | |
| #define | UUART_GET_WAKEUP_FLAG(uuart) |
| Get wakeup flag. More... | |
| #define | UUART_CLR_WAKEUP_FLAG(uuart) |
| Clear wakeup flag. More... | |
| #define | UUART_TRIGGER_RX_PDMA(uuart) |
| Trigger RX PDMA function. More... | |
| #define | UUART_TRIGGER_TX_PDMA(uuart) |
| Trigger TX PDMA function. More... | |
| #define | UUART_DISABLE_RX_PDMA(uuart) |
| Disable RX PDMA transfer. More... | |
| #define | UUART_DISABLE_TX_PDMA(uuart) |
| Disable TX PDMA transfer. More... | |
| #define | UUART_PDMA_ENABLE(uuart, u32FuncSel) |
| Enable specified USCI_UART PDMA function. More... | |
| #define | UUART_PDMA_DISABLE(uuart, u32FuncSel) |
| Disable specified USCI_UART PDMA function. More... | |
Functions | |
| void | UUART_ClearIntFlag (UUART_T *uuart, uint32_t u32Mask) |
| Clear USCI_UART specified interrupt flag. More... | |
| uint32_t | UUART_GetIntFlag (UUART_T *uuart, uint32_t u32Mask) |
| Get USCI_UART specified interrupt flag. More... | |
| void | UUART_Close (UUART_T *uuart) |
| Disable USCI_UART function mode. More... | |
| void | UUART_DisableInt (UUART_T *uuart, uint32_t u32Mask) |
| Disable interrupt function. More... | |
| void | UUART_EnableInt (UUART_T *uuart, uint32_t u32Mask) |
| Enable interrupt function. More... | |
| uint32_t | UUART_Open (UUART_T *uuart, uint32_t u32baudrate) |
| Open and set USCI_UART function. More... | |
| uint32_t | UUART_Read (UUART_T *uuart, uint8_t pu8RxBuf[], uint32_t u32ReadBytes) |
| Read USCI_UART data. More... | |
| uint32_t | UUART_SetLine_Config (UUART_T *uuart, uint32_t u32baudrate, uint32_t u32data_width, uint32_t u32parity, uint32_t u32stop_bits) |
| Set USCI_UART line configuration. More... | |
| uint32_t | UUART_Write (UUART_T *uuart, uint8_t pu8TxBuf[], uint32_t u32WriteBytes) |
| Write USCI_UART data. More... | |
| void | UUART_EnableWakeup (UUART_T *uuart, uint32_t u32WakeupMode) |
| Enable USCI_UART Wake-up Function. More... | |
| void | UUART_DisableWakeup (UUART_T *uuart) |
| Disable USCI_UART Wake-up Function. More... | |
| void | UUART_EnableFlowCtrl (UUART_T *uuart) |
| Enable USCI_UART auto flow control. More... | |
| void | UUART_DisableFlowCtrl (UUART_T *uuart) |
| Disable USCI_UART auto flow control. More... | |
M480 series USCI UART (UUART) driver header file.
Definition in file usci_uart.h.
1.8.15