![]() |
M480 BSP
V3.05.001
The Board Support Package for M480 Series
|
M480 series USCI UART (UUART) driver source file. More...
Go to the source code of this file.
Functions | |
| void | UUART_ClearIntFlag (UUART_T *uuart, uint32_t u32Mask) |
| Clear USCI_UART specified interrupt flag. More... | |
| uint32_t | UUART_GetIntFlag (UUART_T *uuart, uint32_t u32Mask) |
| Get USCI_UART specified interrupt flag. More... | |
| void | UUART_Close (UUART_T *uuart) |
| Disable USCI_UART function mode. More... | |
| void | UUART_DisableInt (UUART_T *uuart, uint32_t u32Mask) |
| Disable interrupt function. More... | |
| void | UUART_EnableInt (UUART_T *uuart, uint32_t u32Mask) |
| Enable interrupt function. More... | |
| uint32_t | UUART_Open (UUART_T *uuart, uint32_t u32baudrate) |
| Open and set USCI_UART function. More... | |
| uint32_t | UUART_Read (UUART_T *uuart, uint8_t pu8RxBuf[], uint32_t u32ReadBytes) |
| Read USCI_UART data. More... | |
| uint32_t | UUART_SetLine_Config (UUART_T *uuart, uint32_t u32baudrate, uint32_t u32data_width, uint32_t u32parity, uint32_t u32stop_bits) |
| Set USCI_UART line configuration. More... | |
| uint32_t | UUART_Write (UUART_T *uuart, uint8_t pu8TxBuf[], uint32_t u32WriteBytes) |
| Write USCI_UART data. More... | |
| void | UUART_EnableWakeup (UUART_T *uuart, uint32_t u32WakeupMode) |
| Enable USCI_UART Wake-up Function. More... | |
| void | UUART_DisableWakeup (UUART_T *uuart) |
| Disable USCI_UART Wake-up Function. More... | |
| void | UUART_EnableFlowCtrl (UUART_T *uuart) |
| Enable USCI_UART auto flow control. More... | |
| void | UUART_DisableFlowCtrl (UUART_T *uuart) |
| Disable USCI_UART auto flow control. More... | |
M480 series USCI UART (UUART) driver source file.
Definition in file usci_uart.c.
1.8.15