![]() |
M480 BSP
V3.05.001
The Board Support Package for M480 Series
|
Smartcard library header file. More...
#include "NuMicro.h"Go to the source code of this file.
Data Structures | |
| struct | SCLIB_CARD_INFO_T |
| A structure holds smartcard information. More... | |
Macros | |
| #define | SCLIB_MAX_ATR_LEN |
| #define | SCLIB_MIN_ATR_LEN |
| #define | SCLIB_PROTOCOL_UNDEFINED |
| #define | SCLIB_PROTOCOL_T0 |
| #define | SCLIB_PROTOCOL_T1 |
| #define | SCLIB_SUCCESS |
| #define | SCLIB_ERR_CARD_REMOVED |
| #define | SCLIB_ERR_OVER_RUN |
| #define | SCLIB_ERR_PARITY_ERROR |
| #define | SCLIB_ERR_NO_STOP |
| #define | SCLIB_ERR_SILENT_BYTE |
| #define | SCLIB_ERR_READ |
| #define | SCLIB_ERR_WRITE |
| #define | SCLIB_ERR_TIME0OUT |
| #define | SCLIB_ERR_TIME1OUT |
| #define | SCLIB_ERR_TIME2OUT |
| #define | SCLIB_ERR_AUTOCONVENTION |
| #define | SCLIB_ERR_CLOCK |
| #define | SCLIB_ERR_ATR_UNRECOGNIZED |
| #define | SCLIB_ERR_ATR_INVALID_PARAM |
| #define | SCLIB_ERR_ATR_INVALID_TCK |
| #define | SCLIB_ERR_PPS |
| #define | SCLIB_ERR_T1_PROTOCOL |
| #define | SCLIB_ERR_T1_ABORT_RECEIVED |
| #define | SCLIB_ERR_T1_RESYNCH_RECEIVED |
| #define | SCLIB_ERR_T1_VPP_ERROR_RECEIVED |
| #define | SCLIB_ERR_T1_WTXRES_RECEIVED |
| #define | SCLIB_ERR_T1_IFSRES_RECEIVED |
| #define | SCLIB_ERR_T1_ABORTRES_RECEIVED |
| #define | SCLIB_ERR_T1_CHECKSUM |
| #define | SCLIB_ERR_T0_PROTOCOL |
| #define | SCLIB_ERR_DEACTIVE |
| #define | SCLIB_ERR_CARDBUSY |
Functions | |
| int32_t | SCLIB_Activate (uint32_t num, uint32_t u32EMVCheck) |
| Activate a smartcard. More... | |
| int32_t | SCLIB_ActivateDelay (uint32_t num, uint32_t u32EMVCheck, uint32_t u32Delay) |
| Activate a smartcard with large delay between set VCC high and start CLK output. More... | |
| int32_t | SCLIB_ColdReset (uint32_t num) |
| Cold reset a smartcard. More... | |
| int32_t | SCLIB_WarmReset (uint32_t num) |
| Warm reset a smartcard. More... | |
| void | SCLIB_Deactivate (uint32_t num) |
| Deactivate a smartcard. More... | |
| int32_t | SCLIB_GetCardInfo (uint32_t num, SCLIB_CARD_INFO_T *s_info) |
| Get the card information (e.g., protocol selected, ATR...) after activation success. More... | |
| int32_t | SCLIB_StartTransmission (uint32_t num, uint8_t *cmdBuf, uint32_t cmdLen, uint8_t *rspBuf, uint32_t *rspLen) |
| Start a smartcard transmission. More... | |
| int32_t | SCLIB_SetIFSD (uint32_t num, uint8_t size) |
| Set interface device max information field size (IFSD) More... | |
| __weak void | SCLIB_RequestTimeExtension (uint32_t u32Protocol) |
| A callback called by library while smartcard request for a time extension. More... | |
| uint32_t | SCLIB_CheckCDEvent (uint32_t num) |
| Process card detect event in IRQ handler. More... | |
| uint32_t | SCLIB_CheckTimeOutEvent (uint32_t num) |
| Process time out event in IRQ handler. More... | |
| uint32_t | SCLIB_CheckTxRxEvent (uint32_t num) |
| Process card transmission event in IRQ handler. More... | |
| uint32_t | SCLIB_CheckErrorEvent (uint32_t num) |
| Process error event in IRQ handler. More... | |
Smartcard library header file.
Definition in file sclib.h.
1.8.15