 |
M480 BSP
V3.05.001
The Board Support Package for M480 Series
|
|
M480 BSP
V3.05.001
The Board Support Package for M480 Series
|
M480 series EPWM driver source file. More...
#include "NuMicro.h"Go to the source code of this file.
Functions | |
| uint32_t | EPWM_ConfigCaptureChannel (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32UnitTimeNsec, uint32_t u32CaptureEdge) |
| Configure EPWM capture and get the nearest unit time. More... | |
| uint32_t | EPWM_ConfigOutputChannel (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32Frequency, uint32_t u32DutyCycle) |
| This function Configure EPWM generator and get the nearest frequency in edge aligned(up counter type) auto-reload mode. More... | |
| void | EPWM_Start (EPWM_T *epwm, uint32_t u32ChannelMask) |
| Start EPWM module. More... | |
| void | EPWM_Stop (EPWM_T *epwm, uint32_t u32ChannelMask) |
| Stop EPWM module. More... | |
| void | EPWM_ForceStop (EPWM_T *epwm, uint32_t u32ChannelMask) |
| Stop EPWM generation immediately by clear channel enable bit. More... | |
| void | EPWM_EnableADCTrigger (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32Condition) |
| Enable selected channel to trigger ADC. More... | |
| void | EPWM_DisableADCTrigger (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disable selected channel to trigger ADC. More... | |
| int32_t | EPWM_EnableADCTriggerPrescale (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32Prescale, uint32_t u32PrescaleCnt) |
| Enable and configure trigger ADC prescale. More... | |
| void | EPWM_DisableADCTriggerPrescale (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disable Trigger ADC prescale function. More... | |
| void | EPWM_ClearADCTriggerFlag (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32Condition) |
| Clear selected channel trigger ADC flag. More... | |
| uint32_t | EPWM_GetADCTriggerFlag (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Get selected channel trigger ADC flag. More... | |
| void | EPWM_EnableDACTrigger (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32Condition) |
| Enable selected channel to trigger DAC. More... | |
| void | EPWM_DisableDACTrigger (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disable selected channel to trigger DAC. More... | |
| void | EPWM_ClearDACTriggerFlag (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32Condition) |
| Clear selected channel trigger DAC flag. More... | |
| uint32_t | EPWM_GetDACTriggerFlag (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Get selected channel trigger DAC flag. More... | |
| void | EPWM_EnableFaultBrake (EPWM_T *epwm, uint32_t u32ChannelMask, uint32_t u32LevelMask, uint32_t u32BrakeSource) |
| This function enable fault brake of selected channel(s) More... | |
| void | EPWM_EnableCapture (EPWM_T *epwm, uint32_t u32ChannelMask) |
| Enable capture of selected channel(s) More... | |
| void | EPWM_DisableCapture (EPWM_T *epwm, uint32_t u32ChannelMask) |
| Disable capture of selected channel(s) More... | |
| void | EPWM_EnableOutput (EPWM_T *epwm, uint32_t u32ChannelMask) |
| Enables EPWM output generation of selected channel(s) More... | |
| void | EPWM_DisableOutput (EPWM_T *epwm, uint32_t u32ChannelMask) |
| Disables EPWM output generation of selected channel(s) More... | |
| void | EPWM_EnablePDMA (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32RisingFirst, uint32_t u32Mode) |
| Enables PDMA transfer of selected channel for EPWM capture. More... | |
| void | EPWM_DisablePDMA (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disables PDMA transfer of selected channel for EPWM capture. More... | |
| void | EPWM_EnableDeadZone (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32Duration) |
| Enable Dead zone of selected channel. More... | |
| void | EPWM_DisableDeadZone (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disable Dead zone of selected channel. More... | |
| void | EPWM_EnableCaptureInt (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32Edge) |
| Enable capture interrupt of selected channel. More... | |
| void | EPWM_DisableCaptureInt (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32Edge) |
| Disable capture interrupt of selected channel. More... | |
| void | EPWM_ClearCaptureIntFlag (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32Edge) |
| Clear capture interrupt of selected channel. More... | |
| uint32_t | EPWM_GetCaptureIntFlag (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Get capture interrupt of selected channel. More... | |
| void | EPWM_EnableDutyInt (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32IntDutyType) |
| Enable duty interrupt of selected channel. More... | |
| void | EPWM_DisableDutyInt (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disable duty interrupt of selected channel. More... | |
| void | EPWM_ClearDutyIntFlag (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Clear duty interrupt flag of selected channel. More... | |
| uint32_t | EPWM_GetDutyIntFlag (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Get duty interrupt flag of selected channel. More... | |
| void | EPWM_EnableFaultBrakeInt (EPWM_T *epwm, uint32_t u32BrakeSource) |
| This function enable fault brake interrupt. More... | |
| void | EPWM_DisableFaultBrakeInt (EPWM_T *epwm, uint32_t u32BrakeSource) |
| This function disable fault brake interrupt. More... | |
| void | EPWM_ClearFaultBrakeIntFlag (EPWM_T *epwm, uint32_t u32BrakeSource) |
| This function clear fault brake interrupt of selected source. More... | |
| uint32_t | EPWM_GetFaultBrakeIntFlag (EPWM_T *epwm, uint32_t u32BrakeSource) |
| This function get fault brake interrupt flag of selected source. More... | |
| void | EPWM_EnablePeriodInt (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32IntPeriodType) |
| Enable period interrupt of selected channel. More... | |
| void | EPWM_DisablePeriodInt (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disable period interrupt of selected channel. More... | |
| void | EPWM_ClearPeriodIntFlag (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Clear period interrupt of selected channel. More... | |
| uint32_t | EPWM_GetPeriodIntFlag (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Get period interrupt of selected channel. More... | |
| void | EPWM_EnableZeroInt (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Enable zero interrupt of selected channel. More... | |
| void | EPWM_DisableZeroInt (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disable zero interrupt of selected channel. More... | |
| void | EPWM_ClearZeroIntFlag (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Clear zero interrupt of selected channel. More... | |
| uint32_t | EPWM_GetZeroIntFlag (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Get zero interrupt of selected channel. More... | |
| void | EPWM_EnableAcc (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32IntFlagCnt, uint32_t u32IntAccSrc) |
| Enable interrupt flag accumulator of selected channel. More... | |
| void | EPWM_DisableAcc (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disable interrupt flag accumulator of selected channel. More... | |
| void | EPWM_EnableAccInt (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Enable interrupt flag accumulator interrupt of selected channel. More... | |
| void | EPWM_DisableAccInt (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disable interrupt flag accumulator interrupt of selected channel. More... | |
| void | EPWM_ClearAccInt (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Clear interrupt flag accumulator interrupt of selected channel. More... | |
| uint32_t | EPWM_GetAccInt (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Get interrupt flag accumulator interrupt of selected channel. More... | |
| void | EPWM_EnableAccPDMA (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Enable accumulator PDMA of selected channel. More... | |
| void | EPWM_DisableAccPDMA (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disable accumulator PDMA of selected channel. More... | |
| void | EPWM_EnableAccStopMode (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Enable interrupt flag accumulator stop mode of selected channel. More... | |
| void | EPWM_DisableAccStopMode (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disable interrupt flag accumulator stop mode of selected channel. More... | |
| void | EPWM_ClearFTDutyIntFlag (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Clear free trigger duty interrupt flag of selected channel. More... | |
| uint32_t | EPWM_GetFTDutyIntFlag (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Get free trigger duty interrupt flag of selected channel. More... | |
| void | EPWM_EnableLoadMode (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32LoadMode) |
| Enable load mode of selected channel. More... | |
| void | EPWM_DisableLoadMode (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32LoadMode) |
| Disable load mode of selected channel. More... | |
| void | EPWM_ConfigSyncPhase (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32SyncSrc, uint32_t u32Direction, uint32_t u32StartPhase) |
| Configure synchronization phase of selected channel. More... | |
| void | EPWM_EnableSyncPhase (EPWM_T *epwm, uint32_t u32ChannelMask) |
| Enable SYNC phase of selected channel(s) More... | |
| void | EPWM_DisableSyncPhase (EPWM_T *epwm, uint32_t u32ChannelMask) |
| Disable SYNC phase of selected channel(s) More... | |
| void | EPWM_EnableSyncNoiseFilter (EPWM_T *epwm, uint32_t u32ClkCnt, uint32_t u32ClkDivSel) |
| Enable EPWM SYNC_IN noise filter function. More... | |
| void | EPWM_DisableSyncNoiseFilter (EPWM_T *epwm) |
| Disable EPWM SYNC_IN noise filter function. More... | |
| void | EPWM_EnableSyncPinInverse (EPWM_T *epwm) |
| Enable EPWM SYNC input pin inverse function. More... | |
| void | EPWM_DisableSyncPinInverse (EPWM_T *epwm) |
| Disable EPWM SYNC input pin inverse function. More... | |
| void | EPWM_SetClockSource (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32ClkSrcSel) |
| Set EPWM clock source. More... | |
| void | EPWM_EnableBrakeNoiseFilter (EPWM_T *epwm, uint32_t u32BrakePinNum, uint32_t u32ClkCnt, uint32_t u32ClkDivSel) |
| Enable EPWM brake noise filter function. More... | |
| void | EPWM_DisableBrakeNoiseFilter (EPWM_T *epwm, uint32_t u32BrakePinNum) |
| Disable EPWM brake noise filter function. More... | |
| void | EPWM_EnableBrakePinInverse (EPWM_T *epwm, uint32_t u32BrakePinNum) |
| Enable EPWM brake pin inverse function. More... | |
| void | EPWM_DisableBrakePinInverse (EPWM_T *epwm, uint32_t u32BrakePinNum) |
| Disable EPWM brake pin inverse function. More... | |
| void | EPWM_SetBrakePinSource (EPWM_T *epwm, uint32_t u32BrakePinNum, uint32_t u32SelAnotherModule) |
| Set EPWM brake pin source. More... | |
| void | EPWM_SetLeadingEdgeBlanking (EPWM_T *epwm, uint32_t u32TrigSrcSel, uint32_t u32TrigType, uint32_t u32BlankingCnt, uint32_t u32BlankingEnable) |
| Set EPWM leading edge blanking function. More... | |
| uint32_t | EPWM_GetWrapAroundFlag (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Get the time-base counter reached its maximum value flag of selected channel. More... | |
| void | EPWM_ClearWrapAroundFlag (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Clear the time-base counter reached its maximum value flag of selected channel. More... | |
| void | EPWM_EnableFaultDetect (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32AfterPrescaler, uint32_t u32ClkSel) |
| Enable fault detect of selected channel. More... | |
| void | EPWM_DisableFaultDetect (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disable fault detect of selected channel. More... | |
| void | EPWM_EnableFaultDetectOutput (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Enable fault detect output of selected channel. More... | |
| void | EPWM_DisableFaultDetectOutput (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disable fault detect output of selected channel. More... | |
| void | EPWM_EnableFaultDetectDeglitch (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32DeglitchSmpCycle) |
| Enable fault detect deglitch function of selected channel. More... | |
| void | EPWM_DisableFaultDetectDeglitch (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disable fault detect deglitch function of selected channel. More... | |
| void | EPWM_EnableFaultDetectMask (EPWM_T *epwm, uint32_t u32ChannelNum, uint32_t u32MaskCnt) |
| Enable fault detect mask function of selected channel. More... | |
| void | EPWM_DisableFaultDetectMask (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disable fault detect mask function of selected channel. More... | |
| void | EPWM_EnableFaultDetectInt (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Enable fault detect interrupt of selected channel. More... | |
| void | EPWM_DisableFaultDetectInt (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Disable fault detect interrupt of selected channel. More... | |
| void | EPWM_ClearFaultDetectInt (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Clear fault detect interrupt of selected channel. More... | |
| uint32_t | EPWM_GetFaultDetectInt (EPWM_T *epwm, uint32_t u32ChannelNum) |
| Get fault detect interrupt of selected channel. More... | |
M480 series EPWM driver source file.
SPDX-License-Identifier: Apache-2.0
Definition in file epwm.c.
1.8.15