M480 Series CCAP Driver Header File. More...

Macros
#define	CCAP_CTL_CCAPEN

#define	CCAP_CTL_ADDRSW

#define	CCAP_CTL_PKTEN

#define	CCAP_CTL_PLNEN

#define	CCAP_CTL_SHUTTER

#define	CCAP_CTL_UPDATE

#define	CCAP_CTL_RESET

#define	CCAP_CTL_MY8_MY4

#define	CCAP_CTL_MY8_MY8

#define	CCAP_PAR_INFMT_YUV422

#define	CCAP_PAR_INFMT_RGB565

#define	CCAP_PAR_SENTYPE_CCIR601

#define	CCAP_PAR_SENTYPE_CCIR656

#define	CCAP_PAR_INDATORD_YUYV

#define	CCAP_PAR_INDATORD_YVYU

#define	CCAP_PAR_INDATORD_UYVY

#define	CCAP_PAR_INDATORD_VYUY

#define	CCAP_PAR_INDATORD_RGGB

#define	CCAP_PAR_INDATORD_BGGR

#define	CCAP_PAR_INDATORD_GBRG

#define	CCAP_PAR_INDATORD_GRBG

#define	CCAP_PAR_OUTFMT_YUV422

#define	CCAP_PAR_OUTFMT_ONLY_Y

#define	CCAP_PAR_OUTFMT_RGB555

#define	CCAP_PAR_OUTFMT_RGB565

#define	CCAP_PAR_PLNFMT_YUV422

#define	CCAP_PAR_PLNFMT_YUV420

#define	CCAP_PAR_VSP_LOW

#define	CCAP_PAR_VSP_HIGH

#define	CCAP_PAR_HSP_LOW

#define	CCAP_PAR_HSP_HIGH

#define	CCAP_PAR_PCLKP_LOW

#define	CCAP_PAR_PCLKP_HIGH

#define	CCAP_INT_VIEN_ENABLE

#define	CCAP_INT_MEIEN_ENABLE

#define	CCAP_INT_ADDRMIEN_ENABLE

#define	CCAP_INT_MDIEN_ENABLE

#define	CCAP_INVALID_INT ((int32_t)(0xFFFFFFFF-1))

#define	CCAP_INVALID_BUF ((int32_t)(0xFFFFFFFF-2))

#define	CCAP_INVALID_PIPE ((int32_t)(0xFFFFFFFF-3))

#define	CCAP_IS_STOPPED()
	Is CCAP module Enable. More...

#define	CCAP_CLR_INT_FLAG(u32IntMask)
	Clear CCAP flag. More...

#define	CCAP_GET_INT_STS()
	Get CCAP Interrupt status. More...

Functions
void	CCAP_Open (uint32_t u32InFormat, uint32_t u32OutFormet)
	Open engine clock and sensor clock. More...

void	CCAP_SetCroppingWindow (uint32_t u32VStart, uint32_t u32HStart, uint32_t u32Height, uint32_t u32Width)
	Set Cropping Window Starting Address and Size. More...

void	CCAP_SetPacketBuf (uint32_t u32Address)
	Set System Memory Packet Base Address0 Register. More...

void	CCAP_Close (void)
	Close Camera Capture Interface. More...

void	CCAP_EnableInt (uint32_t u32IntMask)
	Set CCAP Interrupt. More...

void	CCAP_DisableInt (uint32_t u32IntMask)
	Disable CCAP Interrupt. More...

void	CCAP_Start (void)
	Start Camera Capture Interface. More...

void	CCAP_Stop (uint32_t u32FrameComplete)
	Stop Camera Capture Interface. More...

void	CCAP_SetPacketScaling (uint32_t u32VNumerator, uint32_t u32VDenominator, uint32_t u32HNumerator, uint32_t u32HDenominator)
	Set Packet Scaling Vertical and Horizontal Factor Register. More...

void	CCAP_SetPacketStride (uint32_t u32Stride)
	Set Packet Frame Output Pixel Stride Width. More...

void	CCAP_EnableMono (uint32_t u32Interface)
	Enable Monochrome CMOS Sensor. More...

void	CCAP_DisableMono (void)
	Disable Monochrome CMOS Sensor. More...

void	CCAP_EnableLumaYOne (uint32_t u32th)
	Enable Luminance 8-bit Y to 1-bit Y Conversion. More...

void	CCAP_DisableLumaYOne (void)
	Disable Luminance 8-bit Y to 1-bit Y Conversion. More...

Detailed Description

M480 Series CCAP Driver Header File.

Definition in file ccap.h.

Macros